Muklis, Mumuh Muhamad (2011) Usulan Autonomous Maintenance Mesin CNC Type TMV-760 Pada Produk Pipe Intake 17113-EON40 Hino (studi kasus Di PT. Wika Intrade Majalengka). Other thesis, Universitas Komputer Indonesia.
Bab 1.pdf
Download (28kB) | Preview
Bab 2.pdf
Download (164kB)
Bab 3.pdf
Download (73kB)
Bab 4.pdf
Download (2MB)
Bab 5.pdf
Download (5MB)
Bab 6.pdf
Download (17kB)
1. cover.pdf
Download (30kB)
3. Abstrak.pdf
Download (11kB)
4. kata pengantar.pdf
Download (19kB)
8.Daftar Pustaka.pdf
Download (9kB)
ABSTRACT B. Inggris.pdf
Download (10kB)
Judul TA Bhs Inggris.pdf
Download (29kB)
Abstract
Perawatan adalah kegiatan pendukung utama yang bertujuan untuk menjaminbr /
kelangsungan peranan fungsional suatu sistem produksi (peralatan, mesin) sehinggabr /
pada saat dibutuhkan dapat dipakai sesuai kondisi yang diharapkan. Hal ini dapatbr /
dicapai dengan melakukan kegiatan pemeliharaan dan perawatan terhadap mesinbr /
tersebut.br /
Pada penelitian ini metode yang digunakan adalah Autonomous Maintenance, yangbr /
merupakan salah satu pilar dari Total Productive Maintenance (TPM). Autonomousbr /
Maintenance adalah kegiatan yang dirancang untuk melibatkan operator dalambr /
merawat mesin. Tujuan autonomous maintenance merubah paradigma lama bahwabr /
operator produksi hanyalah mahir mengoprasikan mesin saja sehingga tidak perlubr /
paham dan tidak perlu peduli dengan kerusakan mesin dan kualitas produk yangbr /
dihasilkan oleh mesin.br /
Penelitian dilakukan di PT. WIKA INTRADE yang bergerak dibidang industribr /
manufaktur, penelitian ini berfokus pada mesin CNC type TMV-760 yangbr /
melakukan proses machining terhadap produk Pipe Intake 17113-EON40 HINO.br /
Permasalahan yang muncul pada mesin ini adalah sering terjadinya pemberhentianbr /
pada saat beroprasi yang disebabkan kerusakan mesin dan komponenkomponennya,br /
karena pemeliharaan yang dilakukan oleh operator sangat sederhana,br /
disebabkan kurangnya keterampilan dari operator. Tahapan pertama melakukanbr /
pengukuran efektivitas mesin CNC type TMV-760 menggunakan metode OEE,br /
kemudian melakukan perbaikan dengan mengusulkan metode autonomousbr /
maintenance.br /
Data yang digunakan data satu tahun terakhir yaitu Bulan Januari-Desember 2010.br /
Selama periode tersebut diperoleh nilai Overall Equipment Effectiveness (OEE)br /
yang berkisar antara 78,90%-89,23%, ternyata tidak semua bulan sudah mempunyaibr /
nilai OEE ideal yaitu 85%. Hal ini disebabkan lamanya downtime dan rejectbr /
produk masih banyak, dikarenakan operator masih memakai paradigma lama. Olehbr /
karena itu diusulkan penerapan metode autonomous maintenance pada operatorbr /
mesin CNC type TMV-760 bertujuan untuk merubah paradigma lama.
Treatment is a major supporter of activities which aims to ensure the continuity of thebr /
functional role a system production (tools, machines) so when needed can be usedbr /
according to the conditions expected. This can be achieved by performingbr /
maintenance activities and maintenance of the machine.br /
In this research is used Autonomous maintenance method, which is one of the pillarsbr /
of Total Productive Maintenance (TPM). Autonomous Maintenance is activitiesbr /
designed to involve operators in the care of the machine. Autonomous maintenancebr /
purposes to change the old paradigm that the production operator is just not proficientbr /
to operate the machine so it does not need to understand and need not be concernedbr /
with damage to the engine and the quality of products produced by the machine.br /
The research done at PT WIKA INTRADE engaged in the manufacturing industry,br /
this research focuses on CNC machine type TMV-760 that does the machining of thebr /
17 113-Intake Pipe products EON40 HINO. The problems that arise on this machinebr /
is a frequent occurrence at the time of dismissal operate due to its components,br /
because the maintenance is performed by the operator is very simple, due to lack ofbr /
skill of the operator. The first stage of measuring the effectiveness of CNC machinebr /
type TMV-760 using the method of OEE, and then the improvement with thebr /
proposed method of autonomous maintenancebr /
The data used from the last one year is January to December 2010. During the periodbr /
values obtained Overall Equipment Effectiveness (OEE), which ranged betweenbr /
78.90% -89.223%, not all months have been an ideal OEE value is 85%. This is duebr /
to the length of downtime and reject the product is still a lot, due to operators stillbr /
have the old paradigm. Therefore, the application of the method proposedbr /
autonomous maintenance method on operator CNC machine type TMV-760 aims tobr /
change the old paradigm.
| Item Type: | Thesis (Other) |
|---|---|
| Additional Information: | Migrasi dari GDL. Identifier: jbptunikompp-gdl-mumuhmuham-26538. Folder: S1-Final_Project / Fakultas_Teknik_dan_Ilmu_Komputer / Teknik_Industri / 2011 |
| Uncontrolled Keywords: | TPM, Overall Equipment Effectiveness, Autonomous Maintenance. |
| Divisions: | S1 Skripsi > Teknik Industri |
| Depositing User: | Robot Migration |
| Date Deposited: | 05 Nov 2026 09:00 |
| Last Modified: | 05 Nov 2026 09:00 |
| URI: | https://elibrary.unikom.ac.id/id/eprint/37774 |
